Icom MA-500TR AIS transponder (prijamnik i predajnik) klase B
MA-500TR za brodove koji nisu SOLAS, kao što su brodovi za razonodu, radni čamci i mala plovila.
AIS transponder automatski prenosi informacije o prometu plovila koja su opremljena sa AIS, kao što i informacije o Vašem plovilu mogu primati ostala AIS opremljena plovila ili bazne stanice čak i u „sjenovitim područjima“ poput skrivenih mjesta iza otoka ili velikog plovila.
Komercijalni brodovi SOLAS već su dužni nositi AIS transponder, tako da AIS na Vašem plovilu biti će prepoznat od strane velikih brodova.
MA-500TR povećava vašu sigurnost na moru.
Veliki "full dot-matrix" zaslon vizualno Vam prikazuje AIS podatke u stvarnom vremenu i djeluje neovisno od računala ili druge opreme morske mreže (a može se povezati).
Kad je spojen na kompatibilni Icom VHF radio, pojedinačni DSC poziv može se lako ostvariti
od MA-500TR.
ZNAČAJKE:
- AIS transponder klase B za plovila koja nisu SOLAS
- Full dot-matrix display vizualno prikazuje informacije o prometu plovila u stvarnom vremenu
- IPX7 vodootporna zaštita za glavnu jedinicu (osim priključaka)
- 3 retka NMEA0183 Ulaz / Izlaz
- GPS prijemnik dolazi s MA-500TR
- CPA i TCPA funkcije upravljanja rizikom od sudara
- Integracija s Icom VHF radio stanicama (potrebna je nova verzija firmvera IC-M603 i IC-M505)
Značajke:
AIS transponder klase B
Podaci o vlastitom brodu automatski se prenose u intervalima od 30 sekundi ili 3 minute pri izlaznoj snazi od 2 W, ovisno o kretanju / brzini plovila.
MA-500TR istovremeno prima dvostruke AIS kanale (Ch. 87B i Ch. 88B) i prima informacije o AIS-u klase A i B klase.
Poslane informacije AIS klase B su pojednostavljene od informacija AIS klase A.
Prenesene informacije s MA-500TR
- statički podaci
• MMSI kôd • Ime plovila • Pozivni znak • Vrsta broda • Položaj GPS antene
- Dinamični podaci
• položaj broda • SOG (brzina nad tlom) • COG (kurs nad zemljom) • datum i vrijeme UTC
• Vrsta GPS antene (unutarnja / vanjska) • PA (preciznost položaja)
Jednostavan rad
MA-500TR ima tri osnovne vrste prikaza: ploter, popis ciljeva i popis opasnosti.
Gumb "Način prikaza" omogućuje vam prebacivanje između tih vrsta prikaza.
Uz ove vrste prikaza, zaslon s detaljima prikazuje podatke o odabranim AIS cilj.
• Prikaz plotera izgleda kao morski radarski prikaz. Zaslon podržava povezivanje prema sjeveru i kretanju te raspon zumiranja od 0,125 NM do 24 NM.
• Prikaz popisa ciljeva prikazuje sva otkrivena plovila i ciljeve opremljene AIS-om.
• Na zaslonu Popis opasnosti prikazuje se popis plovila koja su unutar vašeg broda unutar 6 NM CPA i 60 minuta TCPA. Popis opasnosti može se razvrstati po CPA ili TCPA redoslijedu tipkama tipki.
CPA i TCPA za upravljanje rizikom sudara
CPA (najbliža točka pristupa) i TCPA (vrijeme do CPA) upozoravaju vas kada je plovilo na unaprijed podešenoj udaljenosti (od 0,1 NM do 6,0 NM) i vrijeme za ulazak u raspon CPA (od 1 minute do 60 minuta ).
Kad posuda dođe u raspon CPA i TCPA, ikona plovila (Δ) trepće na zaslonu plotera i emitira zvučni signal.
Kad je spojen na vanjsku audio opremu instaliranu na palubi ili tornju, funkcija alarma sudara upozorava vas čak i kad niste daleko od AIS-ovog transpondera.
Pojedinačni DSC poziv kad je spojen na kompatibilni Icom VHF radio
Icom MA-500TR AIS transponder (prijamnik i predajnik) klase B
MA-500TR for Non-SOLAS vessels such as pleasure craft, workboats and small vessels.
The AIS transponder automatically transmits AIS vessel traffic information over the air and may be received by AIS equipped vessels or base stations even in “shadow areas” like hidden behind an island or a large vessel.
SOLAS commercial vessels are already obliged to carry an AIS transponder, so your own vessel existence can be known by near-by large vessels.
The MA-500TR increases your safety at sea.
The large full dot-matrix display visually shows real-time AIS information and works independently from a PC or other marine network equipment. (But can be connected).
When connected to a compatible Icom VHF radio, an individual DSC call can be made easily
from the MA-500TR.
Major Selling Points:
- Class B AIS transponder for Non-SOLAS vessels
- Full dot-matrix display visually shows real-time vessel traffic information
- IPX7 waterproof protection for main unit (Except connectors)
- 3-lines of NMEA0183 Input/Output
- GPS receiver comes with MA-500TR
- CPA and TCPA collision-risk management functions
- Integration with Icom VHF radios (IC-M603 and IC-M505 new firmware version required)
Features:
Class B AIS transponder
Own vessel information automatically transmitted in 30 seconds or 3 minutes intervals at 2W output power depending on the movement/speed of the vessel.
The MA-500TR receives dual AIS channels (Ch. 87B and Ch. 88B) simultaneously and receives both Class A and Class B AIS information.
The transmitted Class B AIS information is more simplified than the Class A AIS information.
Transmitted information with MA-500TR
- Static data
• MMSI code • Vessel name • Call sign • Type of ship • GPS antenna position
- Dynamic data
• Ship´s position • SOG (Speed over ground) • COG (Course over ground) • UTC date and time
• GPS antenna type (Internal/external) • PA (Position Accuracy)
Simple operation
The MA-500TR has three basic display types: Plotter, Target list and Danger list.
The “Display mode” button allows you to toggle between these display types.
In addition to these display types, the detail screen shows information about the selected
AIS target.
• The plotter display looks like a marine radar display. The display supports north-up and courseup and range zoom from 0.125 NM to 24 NM.
• The target list display shows all detected AIS equipped vessels and targets.
• The Danger list display shows a list of vessels which are within 6 NM CPA and 60 minutes TCPA from your vessel. The Danger list can be sorted by CPA or TCPA order by cursor keys.
CPA and TCPA for collision-risk management
The CPA (Closest Point of Approach) and TCPA (Time to CPA) alert you when a vessel is within the pre-set distance (from 0.1 NM to 6.0 NM) and time to come into the CPA range (from 1 minute to 60 minutes).
When a vessel comes into the CPA and TCPA range, the vessel icon (Δ) blinks on the plotter display and emits a beep sound.
When connected to an external audio equipment installed on the deck or tower, the collision alarm function alerts you even when you are away from the AIS transponder.
Individual DSC call
When connected to a compatible Icom VHF radio
Class B AIS Transponder for Pleasure & Fishing Boats
What is an AIS transponder?
An AIS transponder on your boat automatically receives information broadcast by other AIS-equipped vessel's and base stations, all while your own vessel's static and dynamic information is being transmitted. AIS signals may reach where radar cannot, showing AIS-equipped vessels that might otherwise be hidden, such as on the other side of an island or behind a larger vessel. SOLAS commercial vessels are already required to carry a Class A AIS transponder, so your position will be known by nearby large vessels. The MA-500TR increases your safety at sea.
Class B AIS transponder
The MA-500TR is a Class B AIS transponder for Non-SOLAS vessels such as pleasure craft, workboat and small vessels. Your vessels information will automatically be transmitted at fixed intervals or under base station control. The MA-500TR receives dual AIS channels (Ch. 87B and Ch. 88B) simultaneously and receives both Class A and Class B AIS information.
Transmitted information by MA-500TR is
- MMSI code
- Vessel name
- Call sign
- Type of ship
- GPS antenna position
- Ship's position
- SOG (Speed over ground)
- COG (Course over ground)
- UTC date and time
- GPS antenna type
- PA (Position Accuracy)
Simple operation
The Plotter display looks like a marine radar display. North-up, course-up and range zoom from 0.125 NM to 24 NM are supported. The Target list display shows all detected AIS equipped vessels and targets. The Danger list display shows a list of vessels that are within 6 NM CPA and 60 minutes TCPA from your vessel. The Danger list can be sorted by CPA or TCPA order. In addition to these display types, the Detail screen shows various information about the selected AIS target.
CPA and TCPA for collision-risk management
When a vessel comes into the CPA and TCPA range, the vessel icon blinks on the Plotter display and emits a beep sound. When connected to external audio equipment installed on the deck or tower, the collision alarm function will alerts you even when you are away from the AIS transponder.
Individual DSC call*
When connected to a compatible Icom VHF radio, it's easy to make an individual DSC call. Select a vessel using the MA-500TR's cursor keys and then push the "DSC" button on the MA-500TR. It is not required to input an MMSI number manually.
| * |
This function works only when connected to compatible Icom transceivers. |
100 Waypoints memory
Up to 100 waypoints can be stored on the waypoint list. The "MOB" button allows you to set a waypoint on your current position instantly.
Safety-related message
When the MA-500TR receives a safety-related message from a Class A AIS transponder, the message icon appears on the Plotter display. Up to 20 received DSC messages are automatically stored in the log memory.
3-line NMEA input/output
The MA-500TR has 15-pin D-SUB connector providing 3-lines of NMEA input/output on the rear panel. The supplied NMEA connector cable simplifies the installation and connection to the VHF radio and other navigation equipment.
MXG-5000S GPS receiver
The GPS receiver, MXG-5000S comes with the MA-500TR*. It is a 66 channel parallel GPS receiver with SBAS function.
| * |
The MXG-5000S may be sold separately, depending on version. |
Other features
- Full dot-matrix display with adjustable backlight and contrast
- IPX7 waterproof protection
(up to 1m depth of water for 30 minutes; except connectors)
- Self diagnostics function
- Flush mount installation with optional MB-75
- Slow warn function
General
| |
MA-500TR
|
| Operating frequencies |
161.975MHz, 162.025MHz
(Ch 87B, 88B, default)
156.025–162.025MHz |
| Type of emission |
16K0GXW (GMSK) |
| Antenna impedance |
50Ω |
| Usable temperature range |
–20°C to +60°C;
–4°F to +140°F |
| Power supply requirement |
12V DC (9.6–15.6V) |
Current drain
(at 12.0V DC) |
Tx 1.5A
Rx 0.7A |
Dimensions (W×H×D)
(projections not included) |
165×110×123 mm;
6.5×4.33×4.84 in |
| Weight (approx.) |
1.0kg; 2.2lb |
Transmitter
| |
MA-500TR
|
| Output power |
2W |
| Modulation |
GMSK |
| Conducted spurious emission |
Less than –36dBm |
Receiver
| |
MA-500TR
|
| Sensitivity (20% error rate) |
–110dBm (AIS/DSC) |
| Adjacent Ch. selectivity |
More than 70dB (AIS/DSC) |
| Spurious response |
More than 70dB (AIS)
More than 70dB (DSC) |
| Intermodulation |
More than 65dB (AIS/DSC) |
| Conducted spurious emission |
Less than –57dBm (AIS) |
Data interface
| |
MA-500TR
|
| Data Input Interface |
NMEA1, NMEA3:
IEC 61162-1:2000 (4,800bps)
or IEC 61162-2 (38,400bps)
NMEA2:
IEC 61162-2 (38,400bps)
Sentence format (common to NMEA1–3):
RMC, GGA, VTG, GSA, GSV,
DTM, GNS, GLL, and GBS*1
Input level (2V applied):
Less than 2mA |
| Data Output Interface |
NMEA1, NMEA3:
IEC 61162-1:2000 (4,800bps)
or IEC 61162-2 (38,400bps)
NMEA2:
IEC 61162-2 (38,400bps)
Sentence format:
NMEA1:
DSC, RMC, GGA, VTG, GSA, GSV,
GBS, DTM, DSE, GNS and GLL
NMEA2:
VDM, VDO, ALR, ACA, ACS, TXT,
RMC*2, GGA*2, GNS*2, GLL*2, VTG*2,
GSA*2, GSV*2, GBS*2 and DTM*2
NMEA3:
RMC, GGA, VTG, GSA, GSV,
GBS, DTM, GNS, and GLL
Output level:
5V, 40mA Max.
RS-422 balanced type |
| Rating of alert terminal |
24V DC, 500mA max. |
| *1 |
To use a third party GPS receiver with the MA-500TR, a GPS receiver with RAIM function is required. |
| *2 |
Depending on AIS output setting. |
All stated specifications are subject to change without notice or obligation.
OPTIONS:
FLUSH MOUNT KIT MB-75
