JL audio XDM800/8 marine pojačalo 12V 800W 8 kanalno
Part Nr 98686
8-kanalno pojačalo za automobil/pomorstvo klase D punog raspona, 100 W x 8 @ 2 Ω / 75 W x 8 @ 4 Ω - 14,4 V
Ultra-svestrani XDM800/8 isporučuje osam kanala kristalno čiste snage punog raspona i sposoban je isporučiti nevjerojatnih 100 vata na svaki od svojih kanala pri 2 ohma (14,4 V, 1% THD). Tehnologija koja čini toliku snagu mogućom u tako kompaktnom kućištu je naš napredni NexD™ dizajn preklopnika velike brzine, koji dopušta rad Class D pune širine pojasa s iznimno niskim izobličenjem i izvanrednom učinkovitošću.
Prikladan za instalacije u automobilu ili brodu, XDM800/8 izrađen je od materijala za brodove i ima ekskluzivni ulazni filtar s dva načina rada za rad bez buke u brodovima ili automobilima. Mogućnost automatskog uključivanja (putem senzora signala ili senzora DC-offseta) također je uključena za jednostavnu tvorničku nadogradnju sustava.
XDM800/8 uključuje filtar od 12 dB/oktavi za svaku banku kanala, koji se može konfigurirati kao niskopropusni ili visokopropusni filtar, i nudi kontinuirano promjenjiv odabir granične frekvencije od 50-500 Hz. Uz dodatak dodatnog HD-RLC ili MHD-RLC (vodootpornog) daljinskog upravljača razine (svaki se prodaje zasebno), imate mogućnost podešavanja razine dva, četiri ili svih osam kanala pojačala izravno s vozačevog sjedala ili kokpitu.
Evo nekoliko primjera kako se XDM800/8 može koristiti:
- Osmokanalno satelitsko pojačalo: pogon četiri para zvučnika sa 75 W x 8
- Veliko četverokanalno satelitsko pojačalo: most za proizvodnju 200 W x 4 pri 4 Ω
- Šestokanalno sustavno pojačalo: pokreće prednje i stražnje satelite sa 75 W x 4 @ 4 Ω, plus dva subwoofera od 4 Ω sa 200 W svaki
- Razmaknuto šestokanalno satelitsko pojačalo: pogon prednjih zvučnika s 200 W x 2 pri 4Ω, plus četiri zvučnika od 4Ω sa 75 W svaki
- Razmaknuto petokanalno satelitsko pojačalo: pogon tri prednja zvučnika s 200 W @ 4 Ω + stražnji zvučnici s 75 W x 2
- Četverokanalno pojačalo sustava: pokreće lijevi i desni zvučnik s 200 W x 2 @ 4 Ω, plus dva subwoofera od 4 Ω sa 200 W svaki
Završene u elegantnom, crnom prahu, sve kontrole su zaštićene ispod zabrtvljenog, uklonjivog gornjeg poklopca za lak pristup.
JL audio XDM800/8 marine pojačalo 12V 800W 8 kanalno
Part Nr 98686
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ω |
75 W RMS x 8 |
| @ 2 Ω |
100 W RMS x 8 |
| Bridged @ 4Ω |
200 W RMS x 4 |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ω |
60 W RMS x 8 |
| @ 2 Ω |
90 W RMS x 8 |
| Bridged @ 4Ω |
180 W RMS x 4 |
General Specifications
| Frequency Response |
12 Hz - 22 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power |
>104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W |
>84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ω |
>150 / 50 Hz |
| Damping Factor @ 2 Ω |
>75 / 50 Hz |
| THD+N @ Rated Power |
<1% @ 2 Ω per Ch. |
| Input Voltage Range @ RCA Inputs |
200 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge |
4 AWG wire |
| Fuse Rating |
80 A (AFS, AGU or MaxiFuse™) |
Signal Processing
| Filter Mode(s) |
Low-Pass or High-Pass |
| Filter Slope(s) |
12 dB/octave |
| Filter Frequency Range |
50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometers |
Yes |
| Filter Defeat Function |
Yes |
| Remote Level Control |
Optional HD-RLC or MHD-RLC (water-resistant) |
| Remote Level Modes |
2 or 4 or All Channels |
| Channel Input Mode Switch |
Yes (2/4/6/8 ch.) |
| Pass-Through Preamp Output |
None |
| Source Channel Selection for PreOuts |
N/A |
Physical Specifications
| Height (H) |
2.05 in / 52 mm |
| Width (W) |
14.73 in / 374 mm |
| Depth (D) |
7.09 in / 180 mm |
JL audio XDM800/8 marine pojačalo 12V 800W 8 kanalno
Part Nr 98686
8-Channel Class D Full-Range Car/Marine Amplifier, 100 W x 8 @ 2 Ω / 75 W x 8 @ 4 Ω - 14.4V
The ultra-versatile XDM800/8 delivers eight channels of crystal-clear, full-range power and is capable of delivering a whopping 100 watts to each of its channels @ 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.
Suitable for car or boat installations, the XDM800/8 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
The XDM800/8 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter, and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of two, four, or all eight amplifier channels directly from the driver's seat or cockpit.
Here are a few examples of how the XDM800/8 can be used:
- Eight-channel Satellite Amp: drive four pairs of speakers with 75 W x 8
- Big Four-Channel Satellite Amp: bridge to produce 200W x 4 @ 4Ω
- Six-Channel System Amp: drive front and rear satellites with 75 W x 4 @ 4Ω, plus two 4Ω subwoofers with 200 W each
- Staggered Six-Channel Satellite Amp: drive front speakers with 200 W x 2 @ 4Ω, plus four 4Ω speakers with 75 W each
- Staggered Five-Channel Satellite Amp: drive three front speakers with 200 W @ 4Ω + rear speakers with 75 W x 2
- Four-Channel System Amp: drive left and right speakers with 200W x 2 @ 4Ω, plus two 4Ω subwoofers with 200W each
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
TEHNOLOGY
NexD™ Switching Technology
Summary:
NexD™ amplifier technologies produce exceptional audio quality, unsurpassed total efficiency and high power from very compact amplifier designs.
Detailed Information:
Beginning with the original 'Slash' subwoofer amplifiers, JL Audio has been at the forefront of Class D amplifier design. Our NexD™ switching technology stems from our Class D expertise to deliver outstanding fidelity and efficiency, leading to compact amplifiers that deliver high power and exceptional value.
Let's get a little nerdy... A traditional PWM switching amp design uses a fixed switching frequency and varies the pulse width based solely on the audio input signal to the pulse modulator. This basic approach assumes some ideal conditions, like a rock-steady power supply, that do not necessarily occur in a real, in-car installation. Power supply sag with signal causes distortion at all power levels with these designs, even well below clipping. The cure for this is feedback (a corrective signal sent back to the input side), but this becomes impractical as the audio frequency increases, making it a good solution for band-limited (subwoofer) amps, but not for full-range amplifiers.
Taking the above into account when designing the NexD™ subwoofer amplifiers, we have taken the simple fixed PWM approach and enhanced it with a very high switching frequency: 240 kHz, which is about 4x higher than most Class D subwoofer amplifiers. This pushes the amplifier's bandwidth to at least 500 Hz with minimal distortion and improves efficiency, while keeping typically bulky circuity more compact. Your subwoofers will reward you with tight, rock-solid bass performance.
For the full-range NexD™ amplifiers and channels we applied a variable, ultra-high speed version of the NexD™ technology (switching at well over 400 kHz). In these designs, a self-oscillating modulator with "feed-forward" sends information about the instantaneous power supply voltage to the modulator, combining this with the input signal to cancel out any distortion due to supply voltage fluctuation. This reduces distortion prior to applying feedback, simplifying the overall feedback loop design.
The bottom line is simply great audio: clean, powerful and reliable.
Advanced Rollback Protection
Summary:
JL Audio's exclusive Advanced Rollback Protection circuit monitors the amplifier's thermal condition and adjusts amplifier operation to eliminate annoying amplifier shut-down events.
Detailed Information:
Should a JL Audio amplifier equipped with Advanced Rollback Protection reach an unsafe operating temperature, a special circuit rolls back peak power output, without changing gain, until the amplifier cools down to a safe operating temperature. The condition is generally indicated by a red “Thermal” or “Status” LED state. On VXI amplifiers, the LED ring will flash red. Once the amplifier cools down, the circuit restores full peak power output and the indicator reverts to its normal state. The operation of Advanced Rollback Protection is inaudible in most cases, but it ensures that your music keeps on playing, even under the most demanding conditions.
Differential-Balanced Inputs
Summary:
JL Audio’s Differential-Balanced Inputs are engineered to combat induced cable noise, which is a common problem in car and marine audio installations. This technology allows for the use of conventional RCA cables, while delivering many of the benefits of a true balanced connection and accepting a wide range of input signal levels.
Detailed Information:
Today’s vehicles are equipped with sophisticated electronics capable of generating noise and interference that can intrude into the audio path, ruining the listening experience.
Most audio equipment uses single-ended, ground-referenced RCA jacks to receive audio signals. This means that the RCA shield is connected directly to signal ground. This is a simple, cost effective input design that works well for short runs in noise free environments. In noisier environments, this method cannot reject the common mode noise that could be on both RCA conductors (shield and center conductor).
By having more than one chassis-grounded RCA shield on a device, single-ended input designs are also more susceptible to ground loops. If noise is present on both conductors while the shield is connected to ground, the input amplifier will amplify the noise relative to the grounded RCA shield. When there are multiple RCA connections or any other conductors subjected to a magnetic field, this will cause a difference in potential across the RCA loop to be amplified at the grounded RCA as noise (a classic ground loop).
JL Audio’s Differential-Balanced Input circuits measure the center pin of the RCA connection relative to the RCA shield, even when the shield is not connected to ground, and even when the voltages at both conductors are moving relative to ground. Because both the center conductor and the shield see high impedance to ground at the input, a ground loop cannot be formed, as there is no current flow to induce a voltage as noise. This works equally well with differential-balanced, or unbalanced signal sources, making this input architecture compatible with all standard car and marine audio equipment, using standard, unshielded, twisted-pair RCA cables. No special cables are required, unlike the fully balanced connections used in professional audio.
Another benefit of the Differential-Balanced Input design is that it easily accepts low-level and high-level signals from a variety of factory head unit outputs and amplifiers, including single ended “ground referenced” sources, as well as Balanced or Unbalanced “Bridged or BTL” sources. This eliminates the need for Line Output Converters (LOCs) in most installation scenarios.
The obvious question is: “Why don’t all car audio amplifiers use Differential-Balanced Inputs?” The answer is simple: it costs more. Executing a proper differential-balanced input section requires more components and better quality components than a basic single-ended design, so you generally won’t find them on less expensive amplifiers.
