Victron Energy SmartSolar MPPT 150/35 regulator punjenja solarni
Part Nr. SCC115035210
SmartSolar MPPT solarni regulator punjenja osigurava najbolju moguću žetvu energije, bez obzira na vremenske prilike. Djeluje tako da osigurava da se sva energija uzima iz vaših solarnih panela i pohranjuje u vaše baterije, te inteligentno pretvara energiju tako da se vaša baterija napuni u najkraćem mogućem vremenu. Struja punjenja 35 A / Max. PV napon otvorenog kruga 150 V.
SmartSolar maksimizira žetvu energije i inteligentno je preusmjerava tako da vaša baterija bude potpuno napunjena u najkraćem mogućem vremenu. Djeluje tako da se sva energija uzima iz vaših solarnih panela i pohranjuje u vašim baterijama. Ovo je posebno korisno za oblačnih dana kada se intenzitet svjetlosti stalno mijenja. SmartSolar automatski detektira napon akumulatora i prikladan je za širok raspon napona akumulatora. Kontroler također ima programibilni algoritam punjenja, interni temperaturni senzor, VE.Direct vezu za povezivanje s drugim Victron uređajima ili računalom te Bluetooth.
EAN 8719076040187
Model no. SCC115035210
Description VICTRON - SmartSolar MPPT 150/35 solar charge controller
Solar regulator type MPPT
Charging outputs 1
Nominal Power @ 12 V 500 W
Operating voltage 12 V, 24 V, 48 V
Battery type Lead/Acid, AGM, GEL, Lithium (LifePO4)
Victron Energy SmartSolar MPPT 150/35 regulator punjenja solarni
Technical data
Battery voltage |
12/24/48 V |
Rated charge current |
35 A |
Nominal PV power |
12 V: 500 W
24 V: 1000 W
48 V: 2000 W |
Maximum open circuit PV voltage |
150 V |
Operating temperature |
-30 to +60 °C |
Maximum efficiency |
98% |
Self-consumption |
12 V: 20 mA
24 V: 15 mA
48 V: 10 mA |
Charge voltage 'absorption' |
14.4 V / 28.8 V / 57.6 V |
Charge voltage 'float' |
13.8 V / 27.6 V / 55.2 V |
Charge algorithm |
Multistage, adaptive |
Protection |
Reverse polarity on battery (fuse)
PV reverse polarity
Output short circuit
Over temperature |
Power terminals |
16 mm² |
Protection category |
IP43 (electronic components)
IP22 (connection area) |
Dimensions (h x w x d) |
130 x 186 x 70 mm |
Weight: |
1.25 kg |
Standards |
EN/IEC 62109-1, UL 1741, CSA C22.2 |
MPPT 150/35 Specifications
SKU |
VIC.SCC115035210 |
Model # |
SCC115035210 |
|
|
Brand |
Victron Energy |
MPPT 150/35
MPPT controllers operate solar panels at their Maximum Power Point improving efficiency up to 30% by adjusting input voltage to harvest the maximum power from the solar panels. It then manages this power to supply the varying voltage requirement of the battery plus load.
The MPPT senses when to adjust the output that it is being sent to the battery and will shut down for a few microseconds, calculate and make relevant adjustments. The principle of MPPT is to extract the maximum possible power from a solar panel by setting the most efficient combination of voltage and current - maximum power point.
The Victron MPPT SmartSolar support Advanced Maximum Power Point Detection. Unlike the conventional MPPTs which tend to lock to a local MPP when shady conditions occur, [which may not be the optimum MPP], Advance Maximum Power Point Detection will harvest maximin energy by locking to the optimum MPP.
Internal temperature sensor provides additional electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.
Other features:
With no cooling fan the maximum efficiency exceeds 98%.
Flexible charge algorithm provides functionality for fully programmable charge algorithm, and eight preprogrammed algorithms, selectable with a rotary switch
Built-in Bluetooth along with the VictronConnect App provides easy access to the extensive range of functions available on your solar charge controller such as:
Solar Gauge – Realtime power output
Battery Voltage
Battery Current
Battery State
History Analysis
Various Settings
Victron MPPT model names explained
MPPT 100/30, the first number is the maximum PV open circuit voltage. The second number, 30, is the maximum charge current.